Buy 99-041-9072218 Part of Sensor Systems Inc - NSN 5905-00-945-5171
-
Part Number: 99-041-9072218
-
Alternate P/N: 990419072218
-
Manufacturer: Sensor Systems Inc
-
NSN: 5905-00-945-5171 (5905009455171)
-
NIIN: 009455171
-
Item Name : Resistor Variable Wire Wound Non
-
CAGE Code: 04454
-
FSC: 5905 Resistors
-
Last Updated: 05-08-2024
-
Qty Available: 2353
Thank You for Choosing Buy Aviation Parts. We're pleased to inform you that 99-041-9072218 Part with NSN 5905009455171 is now available. Other details of 99-041-9072218 are as Resistor Variable Wire Wound Non, manufactured by Sensor Systems Inc. Fill out the RFQ Form for 99-041-9072218 Part and Get Affordable Deal with Quick Delivery.
NSN Information for Part Number 99-041-9072218 with NSN 5905-00-945-5171, 5905009455171
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-945-5171 Item Description: Resistor Variable Wire Wound Non | 5905 | 009455171 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 99-041-9072218 | 2 | 2 | 3 |
Characteristics Data of NSN 5905-00-945-5171, 5905009455171
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | III OVERALL LENGTH | 1.344 INCHES MINIMUM AND 1.662 INCHES MAXIMUM |
| ABKW | III OVERALL HEIGHT | 0.437 INCHES MINIMUM AND 0.469 INCHES MAXIMUM |
| ABMK | III OVERALL WIDTH | 0.375 INCHES MAXIMUM |
| ABTB | MOUNTING HOLE DIAMETER | 0.226 INCHES MINIMUM AND 0.231 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.125 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.306 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 1.328 INCHES MINIMUM AND 1.360 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.375 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.437 INCHES MINIMUM AND 0.469 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.095 INCHES MINIMUM AND 1.005 INCHES MAXIMUM |
| AJYN | SCREW THREAD DIAMETER | 0.190 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| APXH | TERMINAL LOCATION | REAR END |
| AXGY | MOUNTING METHOD | STANDARD BUSHING AND UNTHREADED HOLE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 15.0 OHMS SINGLE SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0 TO 100.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 90536-4912695 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 SOLDER STUD |
Part 99-041-9072218 With Different Manufacturers
Upload RFQ Sheet
If you have more than one item, upload your spreadsheet here
Great Deals with Top NSN Brands
| Boeing Company |
| Agusta Westland INC |
| Belden |
| Hosonic |
| Ecliptek INC |
| Dialight Corporation |
| Delta Electronics INC |
| Infineon Technologies |
| Microsemi Corp |
| Lattice Semiconductor |
Top-Notch NSN Components
| D C Motor |
| D C Panel |
| Armature |
| Pop Up |
| Hose Kit |
| Lower Cowl |
| Multiplexers |
| Jack Adaptor |
| Remover Shaft Coupling |
| Heater Assembly |
