| MRC | Criteria | Characteristic |
|---|
| AAFZ | BODY MATERIAL | STEEL, CORROSION RESISTING |
| AAQL | BODY STYLE | STANDARD ROUND A |
| AAVL | PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.6870 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1195 INCHES MINIMUM SINGLE SHAFT AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.4850 INCHES NOMINAL SINGLE SHAFT |
| AHCG | MAXIMUM TEMP RISE | 3.0 DEG CELSIUS |
| AJSL | BODY SIZE | 8 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 470.0 ALLQJAA3.500 FINISHED-CHAMFERED |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | 73.50 NOMINAL |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | 69.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 145.00 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 15.000 INPUT TO OUTPUT NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 38.00 OUTPUT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 60.00 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 16.0 CENTIMETER-GRAMS NOMINAL |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.0 CENTIMETER-GRAMS NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2810 INCHES NOMINAL |
| CQTM | TERMINAL LOCATION | REAR |
| CRHN | SHAFT SLOT WIDTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| TTQY | TERMINAL TYPE AND QUANTITY | 7 WIRE LEAD |
| ABHP | OVERALL LENGTH | 1.7660 INCHES MINIMUM AND 1.7670 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 0.7450 INCHES MINIMUM AND 0.7530 INCHES MAXIMUM |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJST | ROTOR INPUT CURRENT RATING | 56.0 MILLIAMPERES NOMINAL |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | 665.00 NOMINAL |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | 520.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 145.00 NOMINAL |
| AJWQ | PILOT LENGTH | 0.0400 NOMINAL INCHES |
| CQZS | SHAFT SLOT DEPTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
| CRSJ | SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| CSJY | TRANSFORMATION RATIO | 1.000 STATOR TO ROTOR NOMINAL |
