| MRC | Criteria | Characteristic |
|---|
| AAQL | BODY STYLE | STANDARD ROUND A |
| AAVL | PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.6880 INCHES MINIMUM AND 0.6910 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.0895 INCHES MINIMUM SINGLE SHAFT AND 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.3570 INCHES MINIMUM SINGLE SHAFT AND 0.3930 INCHES MAXIMUM SINGLE SHAFT |
| AJSL | BODY SIZE | 8 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJST | ROTOR INPUT CURRENT RATING | 48.0 MILLIAMPERES NOMINAL |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 275.0 ALLQJAA3.500 FINISHED-CHAMFERED |
| AJSW | ZRO RESISTANCE IN OHMS | 120.00 NOMINAL |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0/+7.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 9.0 CENTIMETER-GRAMS NOMINAL |
| AJWQ | PILOT LENGTH | 0.0400 NOMINAL MILS AND 0.0460 NOMINAL CENTIMETERS |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 530.00 NOMINAL |
| CQZS | SHAFT SLOT DEPTH | 0.0200 INCHES MINIMUM SINGLE SHAFT AND 0.0300 INCHES MAXIMUM SINGLE SHAFT |
| CRHN | SHAFT SLOT WIDTH | 0.0150 INCHES MINIMUM SINGLE SHAFT AND 0.0250 INCHES MAXIMUM SINGLE SHAFT |
| CRSJ | SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| AAFZ | BODY MATERIAL | ANY ACCEPTABLE |
| ABHP | OVERALL LENGTH | 1.6040 INCHES MINIMUM AND 1.6340 INCHES MAXIMUM |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 72.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 75.00 NOMINAL |
| AJTX | COMPENSATION METHOD | RESISTOR COMPENSATED |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 15.00 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.0 CENTIMETER-GRAMS NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2410 INCHES MINIMUM AND 1.2470 INCHES MAXIMUM |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 WIRE LEAD |
