| MRC | Criteria | Characteristic |
|---|
| AAFZ | BODY MATERIAL | STEEL, STAINLESS |
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVH | SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.1900 INCHES MINIMUM AND 2.2150 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 1.0570 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0900 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.9745 INCHES MINIMUM AND 0.9750 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0470 INCHES MINIMUM AND 0.0530 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.1195 INCHES MINIMUM SINGLE SHAFT AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.3670 INCHES MINIMUM SINGLE SHAFT AND 0.3850 INCHES MAXIMUM SINGLE SHAFT |
| AJSL | BODY SIZE | 11 |
| AJST | ROTOR INPUT CURRENT RATING | 176.0 MILLIAMPERES NOMINAL |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | 170.00 NOMINAL |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | 42.00 NOMINAL |
| AJTN | ZSS IMPEDANCE MAGNITUDE IN OHMS | 44.00 NOMINAL |
| AJTP | ZSS IMPEDANCE ANGLE IN DEG | 24.00 NOMINAL |
| AJVJ | INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -10.0/+10.0 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0/+10.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 6.0 CENTIMETER-GRAMS NOMINAL |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.0 CENTIMETER-GRAMS NOMINAL |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.7650 INCHES MAXIMUM |
| CQTM | TERMINAL LOCATION | REAR |
| CRSJ | SHAFT TYPE | ROUND SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.1250 INCHES NOMINAL |
| CSJY | TRANSFORMATION RATIO | 0.454 ROTOR TO STATOR NOMINAL |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 900.0 MILLIWATTS NOMINAL |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | 77.00 NOMINAL |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | 80.50 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 240.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 4.20 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 9.000 INPUT TO OUTPUT NOMINAL |
| AJWR | SHOULDER LENGTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8130 INCHES MAXIMUM |
| TTQY | TERMINAL TYPE AND QUANTITY | 9 WIRE LEAD |
