| MRC | Criteria | Characteristic |
|---|
| AAFZ | BODY MATERIAL | ANY ACCEPTABLE |
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVH | SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.2320 INCHES NOMINAL |
| ABKK | FLANGE DIAMETER | 1.0570 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0900 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.9700 INCHES MINIMUM AND 0.9800 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0450 INCHES MINIMUM AND 0.0550 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.1195 INCHES MINIMUM SINGLE SHAFT AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.4260 INCHES MINIMUM SINGLE SHAFT AND 0.4500 INCHES MAXIMUM SINGLE SHAFT |
| AJSL | BODY SIZE | 11 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJST | ROTOR INPUT CURRENT RATING | 50.0 MILLIAMPERES NOMINAL |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 970.0 MILLIWATTS NOMINAL |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | 2598.00 NOMINAL |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | 81.80 NOMINAL |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | 60.00 NOMINAL |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | 78.50 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 207.10 MINIMUM AND 228.90 MAXIMUM |
| AJTT | STATOR DC RESISTANCE IN OHMS | 8.925 MINIMUM AND 12.075 MAXIMUM |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0/+7.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 3.0 CENTIMETER-GRAMS NOMINAL |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.3 CENTIMETER-GRAMS NOMINAL |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | 4000.000 MILLIMETER-MILLIGRAMS NOMINAL |
| AJWQ | PILOT LENGTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| AJWR | SHOULDER LENGTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.7960 INCHES NOMINAL |
| CQTM | TERMINAL LOCATION | REAR |
| CQZS | SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| CRHN | SHAFT SLOT WIDTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
| CRSJ | SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| CSJY | TRANSFORMATION RATIO | 0.152 ROTOR TO STATOR NOMINAL |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
