| MRC | Criteria | Characteristic |
|---|
| AAFZ | BODY MATERIAL | STEEL, CORROSION RESISTING |
| AAQL | BODY STYLE | STANDARD ROUND A |
| AAVL | PILOT DIAMETER | 0.5000 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.0480 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 0.7500 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.6910 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.4310 INCHES NOMINAL SINGLE SHAFT |
| AEBZ | III SCHEMATIC DIAGRAM DESIGNATOR | 1 ROTOR, 2 STATOR |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 8 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| AJSP | STATOR INPUT CURRENT RATING | 50.0 MILLIAMPERES NOMINAL |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 350.0 MILLIWATTS NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJSW | ZRO RESISTANCE IN OHMS | 143.00 NOMINAL |
| AJTC | ZSS RESISTANCE IN OHMS | 209.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 109.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 145.00 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 13.000 INPUT TO OUTPUT NOMINAL |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0/+10.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 15.0 CENTIMETER-GRAMS NOMINAL |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.0 CENTIMETER-GRAMS NOMINAL |
| AJWE | SHAFT RADIAL PLAY TEST POINT | 0.250 INCHES NOMINAL |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | 0.0008 INCHES |
| AJWH | SHAFT END PLAY | 0.0003 INCHES NOMINAL |
| AJWP | TERMINAL DESIGNATOR AND SCHEMATIC POSITION | CONNECTION R1 POSITION A AND CONNECTION R2 POSITION B AND CONNECTION R3 POSITION C AND CONNECTION S1 POSITION H AND CONNECTION S2 POSITION E AND CONNECTION S3 POSITION J AND CONNECTION S4 POSITION F |
| AJWQ | PILOT LENGTH | 0.0400 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.3720 INCHES MAXIMUM |
| AJXB | SHAFT MAXIMUM RUNOUT | 0.0010 INCHES |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 510.00 NOMINAL |
| CQZS | SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| CRHN | SHAFT SLOT WIDTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
| CRSJ | SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| CSFG | PLUS J ZSS REACTANCE IN OHMS | 80.00 NOMINAL |
| CSJY | TRANSFORMATION RATIO | 1.000 STATOR TO ROTOR NOMINAL |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| TTQY | TERMINAL TYPE AND QUANTITY | 7 TURRET |
