| MRC | Criteria | Characteristic |
|---|
| AAFZ | BODY MATERIAL | ALUMINUM |
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVH | SHOULDER DIAMETER | 0.8118 INCHES MINIMUM AND 0.8123 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.6160 INCHES NOMINAL |
| ABKK | FLANGE DIAMETER | 0.9360 INCHES MINIMUM AND 0.9370 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0630 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.8400 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.0895 INCHES MINIMUM SINGLE SHAFT AND 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.3750 INCHES NOMINAL SINGLE SHAFT |
| AJSL | BODY SIZE | 10 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJST | ROTOR INPUT CURRENT RATING | 90.0 MILLIAMPERES NOMINAL |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 440.0 MILLIWATTS NOMINAL |
| AJSW | ZRO RESISTANCE IN OHMS | 54.00 NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 13.00 NOMINAL |
| AJTA | ZRS RESISTANCE IN OHMS | 80.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 33.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 11.60 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 6.500 INPUT TO OUTPUT NOMINAL |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0 TO 6.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 16.00 CENTIMETER-GRAMS MAXIMUM |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.00 CENTIMETER-GRAMS MAXIMUM |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | 1800.0 MILLIMETER-MILLIGRAMS NOMINAL |
| AJVW | ALIGNMENT HOLE QUANTITY | 3 |
| AJWQ | PILOT LENGTH | 0.0380 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2410 INCHES MAXIMUM |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 285.00 NOMINAL |
| CQZS | SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 50.00 NOMINAL |
| CRHN | SHAFT SLOT WIDTH | 0.0200 INCHES NOMINAL SINGLE SHAFT |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | 26.00 NOMINAL |
| CRSJ | SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.0500 INCHES MAXIMUM |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.6780 INCHES NOMINAL |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
