| MRC | Criteria | Characteristic |
|---|
| AAGR | UNABLE TO DECODE | INTERNAL, RECTANGULAR DOUBLE RIDGED EXTERNAL, RECTANGULAR |
| AHRV | UNABLE TO DECODE | SEAMLESS SINGLE TUBING SEGMENT |
| AHRW | TUBING TWIST TYPE | STRAIGHT TWIST SINGLE TUBING SEGMENT |
| AHRX | TUBING TWIST ANGLE IN DEG | 90.0 SINGLE TUBING SEGMENT |
| AHSF | FLANGE QUANTITY | 2 |
| AHSX | FLANGE INSIDE WIDTH | 0.688 INCHES MINIMUM ALL FLANGES AND 0.693 INCHES MAXIMUM ALL FLANGES |
| AHSY | FLANGE INSIDE HEIGHT | 0.319 INCHES MINIMUM ALL FLANGES AND 0.323 INCHES MAXIMUM ALL FLANGES |
| AHSZ | FLANGE OUTSIDE WIDTH | 1.358 INCHES MINIMUM ALL FLANGES AND 1.390 INCHES MAXIMUM ALL FLANGES |
| AHTA | FLANGE OUTSIDE HEIGHT | 1.358 INCHES MINIMUM ALL FLANGES AND 1.390 INCHES MAXIMUM ALL FLANGES |
| AHTD | FLANGE DEPTH | 0.235 INCHES MINIMUM ALL FLANGES AND 0.255 INCHES MAXIMUM ALL FLANGES |
| AHTN | FLANGE CONNECTING HOLE DIAMETER | 0.096 INCHES NOMINAL FIRST FLANGE SECOND CONNECTION FACILITY |
| AHTN | FLANGE CONNECTING HOLE DIAMETER | 0.143 INCHES MINIMUM FIRST FLANGE FIRST CONNECTION FACILITY AND 0.149 INCHES MAXIMUM FIRST FLANGE FIRST CONNECTION FACILITY |
| AHTW | VOLTAGE STANDING WAVE RATIO | 1.20 |
| AHTX | INSERTION LOSS IN DECIBELS | 0.25 |
| CQHN | WAVEGUIDE OUTSIDE WIDTH | 0.791 INCHES NOMINAL |
| CRLB | WAVEGUIDE INSIDE HEIGHT | 0.688 INCHES MINIMUM AND 0.693 INCHES MAXIMUM |
| CSFC | WAVEGUIDE OUTSIDE HEIGHT | 0.421 INCHES NOMINAL |
| CSPL | WAVEGUIDE LONGER OFFSET DISTANCE | 15.650 INCHES NOMINAL |
| CSQT | FLANGE CONNECTING FACILITY AND QUANTITY | 2 UNTHREADED HOLE FIRST FLANGE SECOND CONNECTION FACILITY |
| CSQT | FLANGE CONNECTING FACILITY AND QUANTITY | 4 UNTHREADED HOLE FIRST FLANGE FIRST CONNECTION FACILITY |
| CTCJ | UNABLE TO DECODE | CONTACT, DOUBLE RIDGE TYPE ALL FLANGES |
| CWBG | WAVEGUIDE OFFSET DISTANCE | 1.490 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | FLANGES PRESSURIZED,FURNISHED W/ RF/ PRESSURE SEAL AND 0.625 IN. LG SCREW AND LOCKWASHER FOR EACH MTG HOLE |
| FLEX | FLEXIBILITY | RIGID SINGLE TUBING SEGMENT |
| MATT | MATERIAL | ALUMINUM ALLOY ALL FLANGE |
| SFTT | SURFACE TREATMENT | ENAMEL ALL TUBING SEGMENT AND FLANGE OUTSIDE SURFACES |
| STYL | III STYLE DESIGNATOR | BEND TYPE |
