| MRC | Criteria | Characteristic |
|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAQL | III BODY STYLE | ANGLE SHAPE |
| ABHP | OVERALL LENGTH | 0.860 INCHES NOMINAL |
| ABKW | OVERALL HEIGHT | 0.890 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 0.440 INCHES NOMINAL |
| ADZC | ENVIRONMENTAL PROTECTION | SHOCK RESISTANT AND VIBRATION RESISTANT AND HUMIDITY RESISTANT AND THERMAL SHOCK RESISTANT AND MOISTURE RESISTANT AND CORROSION RESISTANT |
| AFQJ | CABLE ENTRANCE DIAMETER | 0.143 INCHES MINIMUM |
| AFQR | THREADED DEVICE TYPE | MOUNTING BUSHING |
| AFQW | MATING END QUANTITY | 1 |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | SMB SINGLE MATING END |
| AFQZ | CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRC | CONTACT MAXIMUM CURRENT RATING IN AMPS | 1.5 SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRD | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 400.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRT | SHELL TYPE | SOLID |
| AFRV | CONNECTOR LOCKING METHOD | SPRING FRICTION |
| AFRW | CONNECTOR CABLE STRAIN RELIEF METHOD | CONDUIT NUT |
| AFRY | RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQJX | NOMINAL THREAD SIZE | 0.190 INCHES |
| CQTM | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| CQTZ | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CQYH | CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING AND COPPER SINGLE MATING END SINGLE CONTACT GROUPING |
| CQZG | INSERT MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE SINGLE MATING END |
| CRBJ | CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204,TYPE II,CLASS 2 MIL SPEC 1ST TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING AND MIL-C-14550,CLASS 4 MIL SPEC 2ND TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CSCF | TERMINAL TYPE | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING |
| CSGF | CONTACT MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626,COMPOSITION 22,1/2 HARD FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CSPT | SHELL MATERIAL | COPPER ALLOY |
| CSWM | SHELL SURFACE TREATMENT | GOLD AND COPPER |
| CTBC | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204,TYPE II,CLASS 2 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-C-14550 MIL SPEC 2ND TREATMENT RESPONSE |
| CTHH | SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626,COMPOSITION 22,1/2 HARD FED SPEC SINGLE MATERIAL RESPONSE |
| CTKL | INSERT MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-19468 MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END |
| CXCG | INCLUDED CONTACT QUANTITY | 1 SINGLE MATING END SINGLE CONTACT GROUPING |
| CXCJ | BUSHING ACCOMMODATION HOLE SHAPE | ROUND W/FLAT |
| CXCL | INCLUDED CONTACT TYPE | COAXIAL PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| PMLC | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACE GOLD |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | 0.001 GOLD GRAINS, TROY |
| PRMT | PRECIOUS MATERIAL | GOLD |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| ZZZK | SPECIFICATION/STANDARD DATA | 13499-357-7207 MANUFACTURERS SPECIFICATION CONTROL |
