| MRC | Criteria | Characteristic |
|---|
| AAJD | THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
| AASA | THREAD LENGTH | 0.440 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| ABFE | III HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | DUSTPROOF |
| ABHP | OVERALL LENGTH | 4.380 INCHES NOMINAL |
| ABNB | FIRST FLAT LENGTH | 0.450 INCHES NOMINAL SINGLE ACTUATOR |
| ABNC | FLAT HEIGHT | 0.210 INCHES NOMINAL SINGLE ACTUATOR |
| ABWV | SHAFT DIAMETER | 0.241 INCHES NOMINAL SINGLE ACTUATOR |
| ABXF | SHAFT LENGTH | 1.090 INCHES NOMINAL SINGLE ACTUATOR |
| ADAV | OVERALL DIAMETER | 1.180 INCHES NOMINAL |
| AEFP | NONTURN DEVICE RADIUS | 0.590 INCHES NOMINAL AT 3:00 O'CLOCK |
| AFBH | INDIVIDUAL SECTION QUANTITY | 6 |
| AFDC | NONTURN DEVICE TYPE | PIN AT 3:00 O'CLOCK |
| AJZE | SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| AKPX | POLE QUANTITY | 1 EACH SECTION REAR |
| AKPY | THROW QUANTITY | 4 EACH SECTION REAR |
| AXGY | MOUNTING METHOD | THREADED BUSHING SINGLE MOUNTING FACILITY |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES SINGLE MOUNTING FACILITY |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 115.0 AC AT SEA LEVEL |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT SEA LEVEL |
| CQRQ | III SHAFT FLAT/SLOT ANGULAR LOCATION | 150.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR |
| CRJH | SWITCH ACTUATOR INDEXING POSITION QUANTITY | 4 SINGLE ACTUATOR |
| CRSJ | SHAFT TYPE | ROUND, FLATTED SINGLE ACTUATOR |
| CSCF | TERMINAL TYPE | TAB, SOLDER LUG |
| CSHW | CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES EACH SECTION REAR |
| CSLC | SWITCH ACTUATOR POSITIONING INCREMENT | 30.0 DEGREES SINGLE ACTUATOR |
| CSMW | III DETENT ROTATIONAL TORQUE RANGE | +2.000 TO 6.000 INCH-POUNDS SINGLE ACTUATOR |
| CTDN | SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP SINGLE ACTUATOR |
| CTHF | CONTACT LOAD CURRENT RATING | 5.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| CTHF | CONTACT LOAD CURRENT RATING | 5.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL AND 3.0 AMPERES INDUCTIVE LOAD DC AT SEA LEVEL |
| FEAT | SPECIAL FEATURES | TO GO CLOCKWISE INTO OR COUNTER CLOCKWISE OUT OF POSITION C THE SHAFT MUST BE PULLED OUT,TURNED AND RELEASED |
| STYL | STYLE DESIGNATOR | TAP, CIRCULAR, BUSHING MOUNT |
| THSD | THREAD SERIES DESIGNATOR | UNEF SINGLE MOUNTING FACILITY |
