| MRC | Criteria | Characteristic |
|---|
| ABKW | OVERALL HEIGHT | 2.430 INCHES MINIMUM AND 2.490 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 3.485 INCHES MINIMUM AND 3.515 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 2.485 INCHES MINIMUM AND 2.515 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 1.985 INCHES MINIMUM AND 2.015 INCHES MAXIMUM |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 2.995 INCHES MINIMUM AND 3.005 INCHES MAXIMUM |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.995 INCHES MINIMUM AND 2.005 INCHES MAXIMUM |
| AFGA | OPERATING TEMP RANGE | +0.0/+50.0 DEG CELSIUS |
| AFSV | AVERAGE LIFE RATING IN HOURS | 10000.0 |
| AHAQ | SOURCE IMPEDANCE RATING PER FUNCTION | 750.0 OHMS BLANK |
| AHAS | LOAD IMPEDANCE PER FUNCTION | 750.0 OHMS BLANK |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| AKNA | INCLOSURE TYPE | HERMETICALLY SEALED |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED STUD |
| CQDR | INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS | 6.0 BLANK |
| CQDW | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 2 TAB, SOLDER LUG INPUT 1ST FUNCTION |
| CQJX | NOMINAL THREAD SIZE | 0.138 INCHES |
| CRBB | FREQUENCY BAND WIDTH PER FUNCTION | 96.750 KILOHERTZ BLANK AND 99.750 KILOHERTZ BLANK |
| CRBC | DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS | 70.0 MINIMUM BLANK AND 6.0 MAXIMUM BLANK AND 6.0 MAXIMUM BLANK AND 70.0 MINIMUM BLANK |
| STYL | STYLE DESIGNATOR | RECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE |
| AHAJ | REFERENCE FREQUENCY PER FUNCTION | 98.250 KILOHERTZ BLANK |
| CQDW | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 2 TAB, SOLDER LUG OUTPUT 2ND FUNCTION |
| CQFC | SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION | 96.250 KILOHERTZ BLANK AND 96.750 KILOHERTZ BLANK AND 99.750 KILOHERTZ BLANK AND 100.250 KILOHERTZ BLANK |
| TEST | TEST DATA DOCUMENT | 08440-200-0025 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA |
