| MRC | Criteria | Characteristic |
|---|
| ABHP | OVERALL LENGTH | 4.450 INCHES MINIMUM AND 4.550 INCHES MAXIMUM |
| ADAR | BODY OUTSIDE DIAMETER | 0.450 INCHES MINIMUM AND 0.550 INCHES MAXIMUM |
| AECR | III VIBRATION RESISTANCE RANGE IN HERTZ | +5.0 TO 55.0 |
| AFGA | OPERATING TEMP RANGE | +0.0/+85.0 DEG CELSIUS |
| AHAJ | REFERENCE FREQUENCY PER FUNCTION | 1.0 GIGAHERTZ BLANK |
| AHAQ | SOURCE IMPEDANCE RATING PER FUNCTION | 50.0 OHMS BLANK |
| AHAS | LOAD IMPEDANCE PER FUNCTION | 50.0 OHMS BLANK |
| AHBL | PRINCIPAL CIRCUITRY TYPE PER FUNCTION | INDUCTANCE-CAPACITANCE BLANK |
| AHBN | III INPUT TERMINAL MANUFACTURER CODE | 30003 |
| AHBP | III INPUT TERMINAL IDENTIFICATION | MIL-C-39012 |
| AHBS | OUTPUT TERMINAL MANUFACTURER CODE | 30003 |
| AHBT | III OUTPUT TERMINAL IDENTIFICATION | MIL-C-39012 |
| AHBZ | VOLTAGE STANDING WAVE RATIO PER FUNCTION | 1.5 BLANK |
| AHCH | III AVERAGE POWER RATING PER FUNCTION | 18.0 WATTS BLANK |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| AKNA | INCLOSURE TYPE | HERMETICALLY SEALED |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 1 THREADED STUD |
| CBBL | FEATURES PROVIDED | NUT |
| CQDR | INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS | 4.0 BLANK |
| CQDW | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 CONNECTOR, PLUG INPUT 1ST FUNCTION |
| CQDW | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 CONNECTOR, RECEPTACLE OUTPUT 2ND FUNCTION |
| CQFC | SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION | 973.00 MEGAHERTZ BLANK AND 985.00 MEGAHERTZ BLANK AND 1.015 GIGAHERTZ BLANK AND 1.027 GIGAHERTZ BLANK |
| CQJX | NOMINAL THREAD SIZE | 0.312 INCHES |
| CQRG | III BODY MATERIAL | ALUMINUM |
| CRBB | FREQUENCY BAND WIDTH PER FUNCTION | 985.00 MEGAHERTZ BLANK AND 1.015 GIGAHERTZ BLANK |
| CRBC | DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS | 3.0 MINIMUM BLANK AND 30.0 MAXIMUM BLANK |
| CRBN | VOLTAGE STANDING WAVE RATIO FREQUENCY LIMITS PER FUNCTION | 985.0 MEGAHERTZ BLANK AND 1.015 GIGAHERTZ BLANK |
| STYL | STYLE DESIGNATOR | ROUND TERMINAL/TERMINALS ON OPPOSITE SURFACES |
