| MRC | Criteria | Characteristic |
|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | 1.050 INCHES MINIMUM AND 1.080 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 0.750 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.125 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.719 INCHES MAXIMUM |
| ADAP | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 0.140 INCHES MAXIMUM |
| ADAV | OVERALL DIAMETER | 0.750 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND |
| AEEZ | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CW |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 300.0 MINIMUM AND 305.0 MAXIMUM |
| AEFK | MAXIMUM STARTING TORQUE | 7.00 INCH-OUNCES |
| AEFM | MAXIMUM STOP TORQUE | 64.00 INCH-OUNCES |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.125 INCHES NOMINAL |
| AJYN | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| APXH | TERMINAL LOCATION | REAR END |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 334.0 MINIMUM AND 336.0 MAXIMUM |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.125 INCHES NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50/+0.50 SINGLE SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0/+20.0 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 50.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
| AEFN | NONTURN DEVICE LOCATION | AT 12 OCLOCK |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 500.0 OHMS SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 45413-124083 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI |
