| MRC | Criteria | Characteristic |
|---|
| AAPN | SECTION QUANTITY | 4 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 1.5610 INCHES MINIMUM AND 1.5620 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.6200 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 1.561 INCHES MINIMUM AND 1.562 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0730 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 1.740 INCHES MINIMUM AND 1.750 INCHES MAXIMUM |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 120.0 |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 60.0 |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.875 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 2.562 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 1.7400 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 1.500 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND |
| AEFD | ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | 1.90 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 1.30 INCH-OUNCES |
| AJYN | SCREW THREAD DIAMETER | 0.164 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNC |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AKPV | MOUNTING FACILITY QUANTITY | 3 |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | THREADED HOLE |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.000 PERCENT, RATED AMPERES C AND BETTER V.G. STEPPING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.000 PERCENT, RATED AMPERES C AND BETTER FINISH |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 25.000 PERCENT, RATED AMPERES C AND BETTER INDUSTRIAL CLEARS |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 25.000 PERCENT, RATED AMPERES C AND BETTER SELECT |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 0.0 1ST SECTION AND 340.0 1ST SECTION AND 354.0 1ST SECTION |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 0.0 2ND SECTION AND 340.0 2ND SECTION |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 0.0 3RD SECTION AND 340.0 3RD SECTION |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 0.0 4TH SECTION AND 340.0 3RD SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.75/+0.75 ALL SECTIONS |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 105.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 4.5 FREE AIR ALL SECTIONS |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS PROPORTIONAL CONFORMITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 2 2ND SECTION |
| CRJS | FIXED TAP QUANTITY PER SECTION | 2 3RD SECTION |
| CRJS | FIXED TAP QUANTITY PER SECTION | 2 4TH SECTION |
| CRJS | FIXED TAP QUANTITY PER SECTION | 3 1ST SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0/+3.0 ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS TABLE |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 ALL SECTIONS |
| TEST | TEST DATA DOCUMENT | 10001-1088621 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| TTQY | TERMINAL TYPE AND QUANTITY | 21 TAB, SOLDER LUG |
