| MRC | Criteria | Characteristic |
|---|
| AAPN | SECTION QUANTITY | 3 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 1.3125 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 2.933 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 1.312 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0930 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 1.453 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.249 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.688 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 2.120 INCHES MAXIMUM |
| ADAV | OVERALL DIAMETER | 1.938 INCHES NOMINAL |
| AECZ | MOUNTING LIP DIAMETER | 1.4380 INCHES NOMINAL |
| AEDA | MOUNTING LIP DEPTH | 0.0730 INCHES MINIMUM |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| AEDZ | SHAFT BEARING TYPE | BEARING |
| AEFD | ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 349.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 1.60 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 1.10 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.00500 INCHES |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES |
| AEGA | LATERAL RUNOUT | 0.004 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.00200 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.004 INCHES |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.000 PERCENT, RATED AMPERES C AND BETTER FINISH |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 25.000 PERCENT, RATED AMPERES C AND BETTER SELECT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 28.605 PERCENT, RATED AMPERES C AND BETTER INDUSTRIAL CLEARS |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 174.5 ALL SECTIONS |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.20/+0.20 1ST SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.20/+0.20 2ND SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.35/+0.35 3RD SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 85.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR ALL SECTIONS |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 ALL SECTIONS |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -1.0/+1.0 DEG ANGULAR ROTATION ALL SECTIONS |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -1.0/+1.0 2ND SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -1.0/+1.0 3RD SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 1ST SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 10 OCLOCK 2ND PRIMARY |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 8 OCLOCK ALL PRIMARIES |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 9 OCLOCK ALL PRIMARIES |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0/+20.0 ALL SECTIONS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 ALL SECTIONS |
| TTQY | TERMINAL TYPE AND QUANTITY | 12 TURRET |
