| MRC | Criteria | Characteristic |
|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 1.8745 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 1.875 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 1.975 INCHES MINIMUM AND 1.995 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 2.783 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 1.9750 INCHES MINIMUM AND 1.9950 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND |
| AEDZ | SHAFT BEARING TYPE | BALL |
| AEEA | SWITCH TYPE | ROTARY |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 350.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 3.30 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 2.40 INCH-OUNCES |
| AEGH | SWITCH OPERATING POSITION | END OF ROTATION |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 PERCENT, RATED AMPERES C AND BETTER INDUSTRIAL CLEARS |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 46.67 PERCENT, RATED AMPERES C AND BETTER FINISH |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 225.0 1ST SECTION |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 315.0 2ND SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25/+0.25 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.8 FREE AIR ALL SECTIONS |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 2ND SECTION |
| CRJS | FIXED TAP QUANTITY PER SECTION | 3 1ST SECTION |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -1.0/+1.0 OHMS ALL SECTIONS |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 50.0 ALL SECTIONS |
| FEAT | SPECIAL FEATURES | IN SECTION ONE THE 225.0 DEG TAP TERMINAL CONNECTED TO CCW TERMINAL AND 315.0 DEG TAP TERMINAL CONNECTED TO CW TERMINAL TO PROVIDE 18000 NOM RESISTANCE,THIS RESISTOR HAS TWO SWITCHES,THE FIRST FROM 295 DEG TO 350 DEG CW,THE SECOND FROM 335 |
| TTQY | TERMINAL TYPE AND QUANTITY | 16 TAB, SOLDER LUG |
