| MRC | Criteria | Characteristic |
|---|
| ABHP | OVERALL LENGTH | 0.3080 INCHES MINIMUM AND 0.3100 INCHES MAXIMUM |
| ADAR | BODY OUTSIDE DIAMETER | 0.8135 INCHES MINIMUM AND 0.8140 INCHES MAXIMUM |
| ADAS | BODY INSIDE DIAMETER | 0.6880 INCHES MINIMUM AND 0.6890 INCHES MAXIMUM |
| AEPR | FLANGE OUTSIDE DIAMETER | 1.0600 INCHES NOMINAL |
| AGFF | FLANGE WIDTH | 0.0480 INCHES MINIMUM AND 0.0500 INCHES MAXIMUM |
| BZLX | CORNER SHAPE | CHAMFERED INSIDE LEFT CORNER |
| BZLX | CORNER SHAPE | SQUARE INSIDE RIGHT CORNER |
| BZLX | CORNER SHAPE | SQUARE LEFT FLANGE BODY CORNER |
| BZLX | CORNER SHAPE | SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER |
| BZLX | CORNER SHAPE | SQUARE OUTSIDE LEFT CORNER |
| BZLX | CORNER SHAPE | SQUARE OUTSIDE RIGHT CORNER |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES RIGHT END SURFACE OF BODY |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES RIGHT END SURFACE OF BODY AND FLANGE |
| MATT | MATERIAL | ALUMINUM ALLOY 7075 OUTER LAYER |
| MATT | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE INNER LAYER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | Q-A-200/11 FED SPEC 1ST MATERIAL RESPONSE OUTER LAYER OR QQ-A-225/9 FED SPEC 2ND MATERIAL RESPONSE OUTER LAYER |
| SFTT | SURFACE TREATMENT | ANODIZE LEFT END SURFACE OF BODY AND FLANGE |
| SFTT | SURFACE TREATMENT | ANODIZE OUTSIDE DIAMETER SURFACE OF BODY |
| SFTT | SURFACE TREATMENT | ANODIZE OUTSIDE DIAMETER SURFACE OF FLANGE |
| SFTT | SURFACE TREATMENT | ANODIZE RIGHT END SURFACE OF BODY |
| SFTT | SURFACE TREATMENT | ANODIZE RIGHT END SURFACE OF BODY AND FLANGE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE LEFT END SURFACE OF BODY AND FLANGE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF BODY |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF FLANGE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE RIGHT END SURFACE OF BODY |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE RIGHT END SURFACE OF BODY AND FLANGE |
| STYL | STYLE DESIGNATOR | SOLID, EXTERNAL FLANGE ONE END |
| TEST | TEST DATA DOCUMENT | 81349-MIL-I-6866 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTIN |
